2000 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron semiconductor technical data data sheet 649, rev. a hermetic power schottky rectifier 200 c maximum operation temperature description: 150 volt, 30 amp, power schottky rectifiers in a hermet ic shd - 2 / 2a / 2b package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 150 volts maximum dc output current (with cathode maint ained @ t c =100 o c) i o 30 amps maximum nonrepetitive forward surge current (t=10ms, sine) i fsm 570 amps maximum junction capacitance (v r =5v) c t 1000 pf maximum thermal resistance (junction to mounting sur face, cathode) r jc 0. 9 c/w maximum storage temperature range tstg - 65 to +175 c maximum operating temperature range top/tstg - 65 to +200 c electrical characteristics characteristic symbol max. units maximum forward voltage drop, pulsed (per leg, i f = 30 amps) t j = 25 c t j = 125 c v f 0.84 0.68 volts maximum reverse current (per leg, i r @ 150 v piv) t j = 25 c t j = 125 c i r 1.0 15 ma SHD115445 SHD115445b
2000 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron data sheet 649, rev. a mechanical dimensions: in inches / mm SHD115445 SHD115445b shd - 2 shd - 2b 0.0 0.2 0.4 0.6 0.8 1.0 forward voltage drop - v f (v) 10 -3 10 -2 10 -1 10 0 10 1 10 2 instantaneous forward current - i f (a) typical forward characteristics 125 c 25 c 175 c 0 20 40 60 80 100 120 140 160 reverse voltage - v r (v) 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 instantaneous reverse current - i r (ma) typical reverse characteristics 75 c 100 c 125 c 50 c 25 c 150 c 175 c 0 20 40 60 80 100 120 140 160 reverse voltage - v r (v) 0 200 400 600 800 1000 junction capacitance - c t (pf) typical junction capacitance 25 c .075 (1.91) max .315.010 (8.00.254) moly lid moly base .315.010 (8.00.254) alumina ring .090 (2.29) max alumina ring moly base (cathode) .060.010 (1.52.254) .015.002 (.381.051) .020.005 r (.508.127 ) .315.010 (8.00.254) .150.010 (3.81.254) .465.020 (11.8.508) .315.010 (8.00.254) .015.005 (.381.127) copper anode
2000 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron data sheet 649, rev. a disclaimer: 1 - the information given herein, including the specifications and dimensions, is subject to chang e without prior notice to improve product characteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department for the late st version of the datasheet(s). 2 - in cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users fail - safe precautions or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the users units according to the datasheet(s). sensitron semiconductor assumes no responsib ility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4 - in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5 - no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of sensitron semiconductor. 7 - the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applic ation will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. when exporting these products (technologies), the necessary procedures are to be taken in accordance w ith related laws and regulations. SHD115445 SHD115445b
|
